Mipex MIPEX-04, User Manual, Page: 40 / 41

Optosense LLC USER MANUAL
Design department MIPEX-04 ULTRA-LOW POWER INFRARED GAS SENSOR
ESAT.100000.00.02 UM Revision 02 December 12th, 2016 Page 40 of 41
THE SOLE PROPERTY OF OPTOSENSE LLC. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF OPTOSENSE LLC IS PROHIBITED.
Table 15. Structure of response to <F> command
Command <F> (hex: “46 0D”) response
Byte number Byte data Data description
1
Hex: “0x0E”
Special character
2-6 T Sensor temperature expressed in ADC counts
7
Hex: “0x09”
Tabulation symbol
8-12 S
t
The ratio
U
s
U
ref
considering temperature correction
13
Hex: “0x09”
Tabulation symbol
14-18 U
s
Operating signal in ADC counts
19
Hex: “0x09”
Tabulation symbol
20-24 U
ref
Reference signal in ADC counts
25
Hex: “0x09”
Tabulation symbol
26-30 S
tz0
The ratio S
t
considering ZERO and ZERO2 coefficients
31
Hex: “0x09”
Tabulation symbol
32-36 S
tz
The ratio S
tz0
considering the drift compensation algorithm
37
Hex: “0x09”
Tabulation symbol
38-42 S
tzkt
The ratio S
tz
considering the coefficient of temperature
sensitivity
43
Hex: “0x09”
Tabulation symbol
44-48 C Concentration based on factory settings
49
Hex: “0x09”
Tabulation symbol
50-54 C
1
Concentration based on user settings
55
Hex: “0x09”
Tabulation symbol
56-60 Status word Status word (see Table 16 for details)
61
Hex: “0x09”
Tabulation symbol
62-69 S/N Sensor serial number
70
Hex: “0x09”
Tabulation symbol
71 CRC
CRC calculated using “exclusive OR” method
72
Hex: “0x09”
Tabulation symbol
73
Hex: “0x0D”
Carriage return