Page 8
Orbit 20 Pro Floor Finisher 988777 Rev A 09/21
Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:
• Your Orbit 20 Pro Floor Finisher is equipped with a safety switch lock and power switch triggers designed
for your safety. Do not attempt to bypass or defeat the safety switch lock. Never use any device to lock the
power switch triggers in the “ON” position.
• Do not leave the machine plugged in. Turn off the switch and unplug the electrical cord when not in use and
before servicing or changing the brushes or pads.
• Do not allow the machine to be used as a toy. Close attention is necessary when used near children. Do not
leave the machine connected to an electrical outlet unattended.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with a damaged cord or plug. If the machine is not working as it should, has been dropped, dam-
aged, or left outdoors, return it to a service center before using.
• Use care to keep the electrical supply cord around sharp edges or corners. Keep the cord away from the
heated surfaces.
• Connect to properly grounded (3-wire) outlet only. Refer to Grounding Instructions.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on the cord. To unplug, grasp the plug and pull.
• Do not handle the plug or the machine with wet hands.
• Wind the cord no tighter than is necessary to retain it during storage. Refer to Cord Storage.
• Use extra care when working on or near stairs.
• Do not use in conjunction with fl ammable or combustible liquids such as gasoline, or use in areas where
explosive vapor or dust may be present.
• Store your Orbit 20 Pro Floor Finisher indoors in a cool, dry area.
• Keep your work area well lighted.
• WARNING
: To avoid electrical shock, use indoor only.
:$51,1*
(/(&75,&6+2&.&$1&$86(6(5,286
,1-85<25%()$7$/3/($6(5($'7+(
)2//2:,1*,16758&7,(86(
$1'23(5$7,2162))/225),1,6+,1*
0$&+,1(6
Summary of Contents for Orbit 20 Pro
