Minuit Une IVL PHOTON, Service Manual

Page: 30 / 63

IVL™ Photon Service Manual AA 30
REP5:
REPLACING MT1-001068- INTERNAL-TOP-
COVER
Tools
needed:
TORX T20 screwdriver
Instructions Diagram
5.1
You first need to remove the MT1-001714-
GLOBE-ASSEMBLY (see section
REP4:
)
Unscrew the 4 screws MT1-000798 and
MT1-002514 using a TORX T20 screwdriver,
like shown in the diagram.
Make sure not to lose the screws and
washers MT1-001991.
5.2
Remove the top cover MT1-001068 like
shown in the diagram.
When putting the top cover MT1-001068
back in place, manually hold it in its position
while screwing the screws MT1-000798 with
the washers MT1-001991 from the opposite
side.
Always start with the scew number
“2” on
the previous diagram (5.1).
Try to put the top cover in the same direction
as it was to make it easier screw it back.
Some versions of the fixtures have 3 or 4
screws.