23
/
36
Any time, you can start chiller again more than three minutes later after
the chiller’s power off, otherwise the chiller can be easily damaged.
Prevent wiring from being sprinkled, otherwise conducing creepage and
damaging the chiller.
Do not touch inside, prevent high speed fan and high temperature from
hurting body.
Pay attention to the water line of tank at any moment. (Under the state
of full water in all pipes)
3.4.3 Requirements of cutting accessorial air
Air pressure: 0.02~0.4Mpa.
When using air, must insure the biggest grain
＜
5
μ
m ,the maximum
condensate content
＜
5mg/m
3
, the maximum oiliness content
＜
0.1mg/m
3
,
for these we should equip oil-water separator, drier and filter.
