minrray UV910, User Manual, Page: 17 / 40

16
Mode 1: press *+#+1
Mode 2: press *+#+2
Mode 3: press *+#+3
2 The working mode of the camera can also be set by terminal COM, the relative command can
be seen in the COM command list.
3 Setting camera working mode by camera controller
Note: By the camera controller, the camera can only be set to mode 0 and mode 3. And only in
mode 3, the camera parameter can be set. The camera can not be transferred to other mode.
Mode 0: *+#+0
Mode 3: *+#+3
For the convenience of video user, camera working mode will not be memorized automatically,
and every time there will be mode 0, the default mode after power-on.
IR Remote Controller
After power on, the camera can receive and execute IR remote command. By IR remote
controller can control the preset, Pan/Tilt rotation etc.
Key-press note:
1, the key combination in this manual is operated based on the sequence, take one example:
“ *+#+ F1” means press “*” first, then press “#”, finally press “F1”.
1 、 PAN/TITL OPERATION
Up: press
Down: press
Left: press
Right: press
press“home”key: return to middle position.
There are three grades for speed level: when zoom is 1-4 the speed is fast; when zoom is 5-7 the
speed is middle; when zoom is 7-10 the speed is low.
Press up, down, left, right key for long time, the camera can keep moving continuously, and stop
when you release.