the following table.
Menu
Explanation
Local
configure
Including video preview mode, record video packing time ,record video storage route settings etc.
Audio
configure
Including audio compressing format, sampling frequency, sampling precision, compressing code
rate settings etc.
Video
configure
Including video encoding, video parameters, character-overlapping, character size, video output
setting etc.
Network
configure
Including basic parameters, Ethernet, DNS, GB28181, wireless network setting etc.
System
configure
Including equipment property, system time, user management, version update, reset, reboot device
settings etc.
1) Local configuration
Video Preview Mode
: user can choose real-time priority or fluency priority: The delay will be small when
under real time priority mode and fluency will be good when under fluency priority mode. Setting based on the
user need (Default value: real time normal (2), real time best (1), fluency normal (3), fluency good (4) and
fluency best (5))
Recording packing time (minute)
: Set recording video packing time (default is 10, range from 1~120 minutes)
Recording file packaging format type
: set the video file packaging format type (default MP4, TS optional)
Recording/Snapshot file storage route
: Set local recording video/snapshot file storage route. (Default
D:\MyIPCam\)
Click the
Save
button to make settings effective.
2) Audio Configuration
Switch
: Choose to enable the audio or not.
Compressing Format
: Set audio compressing format and the device will reboot automatically after change
(default MP3, AAC, G.711A optional)
Sampling Frequency
: Set sampling frequency and the device will reboot automatically after change (default
44100, 8000, 16000, 32000 and 48000 optional, G.711A default 8000)
Sampling Precision
: Set sampling precision (default 16bits)
Compressing Code Rate
: Set audio compressing code rate (default 64bits, 32, 48, 96, 128bits optional)
Input Volume
: Set the input volume (default 2, 1-10 optional)
Click “Save”, it will remind” Enable has changed. Restart the device to take effect after the success of the
save.”, then please reboot the camera to make new setting effect.
4.2.5 Video Configuration
1) Video Encoding
Code stream: Stream:
Different video output mode setting, use different streams.(Main stream, secondary
stream)
Compression Format:
Set the video compression format, save and reboot to take it effect (main / secondary
stream default: H.264, H.265 optional)
Profile: Set
Profile mode (default HP, BP, MP optional
）
Video Size:
Set video image resolution, save and reboot to take it effect (main stream default 1920*1080
1280*720, 640*480 optional; default secondary stream 320*180,640*360,320*240,640*480,320*180,
1280*720 optional )
Stream Rate control:
Set rate control mode, save and reboot to take it effect (main / secondary stream default
variable bit rate, fixed rate is for option).
Image Quality:
Set the image quality, image quality can be changed only when rate control is variable bit
rate,(main stream defaulted is better, secondary stream default is not good, there are best, better, good, bad,
