manualshive.com logo in svg

Minolta PAGEWORKS 8E, User Manual, Page: 213 / 255

Share
Download
Minolta PAGEWORKS 8E User Manual Download Page 213

6-11

Cleaning the Printer

Ma

inten

ance

Ch

apte

r 6

Cleaning the Printer

Dust, dirt, and paper debris on the outer surfaces and inside the printer 
can interfere with printer performance. Clean the printer regularly.

Note

Caution

Cleaning the Outside of the Printer

Wipe the outside of the printer with a soft cloth moistened with a 
neutral, household detergent.

Cleaning the Paper Transport Roller

1.

Turn off the printer and unplug the power cord.

2.

Press the top cover release button and open the top cover.

• Use a soft cloth to clean the printer. Never use abrasives or corrosive

detergents.

• The fusing unit can become very hot during operation. Do not touch the

area to avoid injury. Wait for at least 10 minutes after the printer has
been turned off and make sure that the fusing unit has cooled before
cleaning the interior of the printer.

PageWorks.book  Page 11  Tuesday, April 21, 1998  3:55 PM

Summary of Contents for PAGEWORKS 8E
































































































































































































































































Reviews:

No comments