Minolta PageWorks 25 User Manual Download Page 152

Page: 152 / 317

4-29

Using PageWorks 25 Printer Driver Setup Dialog

rint

r D

riv

apt

String

The contents of the watermark that you wish to create are entered
here.

Shading

The density of the watermark that will appear on the document is
specified here.

Style

These settings can be used to specify the style of the watermark’s
font.

Font

The typeface and size of the watermark is specified here.

Angle

Rotate the angle of the watermark’s placement through the value
specified in this box.

Position

Adjust the vertical and horizontal values to position the watermark
on the document.

To Remove a Watermark from the List

Select the watermark that you wish to remove from the list, click the

Delete

button and click

To Edit a Watermark

To edit a watermark that appears on the list, select it and change the
settings, then click

25pw.book Page 29 Thursday, March 16, 2000 10:29 AM

Summary of Contents for PageWorks 25






























































































































































































































































































































Search results

Summary of Contents for PageWorks 25

Reviews:

Related manuals for PageWorks 25

Brands by name

Popular brands

Minolta PageWorks 25, User Manual

Search results

Summary of Contents for PageWorks 25

Reviews:

Related manuals for PageWorks 25

Brands by name

Popular brands