6
Working with the printer
6-14
PagePro 25
Rev. 3.1.1/16.07.99
6.4
Correcting paper feed in trays
Even though the default settings for offsets are optimized for the trays, you
can correct the offset.
Print Test Page
First print a test page to check the offset settings. The test page can only
be printed on DIN-A4 paper.
1
Press the [ON LINE] key.
The display shows OFF-LINE. The printer has been switched Off Line.
2
Press the [MENU] key until the PRINT MENU is displayed.
3
Press the [SCROLL] key until PAPER SOURCE is displayed.
4
Press the [SELECT] key until the tray from which you would like to
print is displayed.
5
Press the [CONFIRM] key.
An asterisk (*) is displayed on the right next to the selection.
6
Press the [MENU] key until TEST PRINT MENU is displayed.
7
Press the [SCROLL] key until PRINT CONFIG appears.
8
Press the [CONFIRM] key.
The test page is now printed.
?
What if no test page is printed out or no error message appears in
the display?
The test page can only be printed on DIN-A4 paper.
➜
Reconfigure the paper tray to DIN-A4 paper.
Summary of Contents for PagePro 25
