Minolta MN12Z, User Manual

Page: 21 / 93

20
Charging the Battery by USB
In other way charging the battery, you can use the USB cable to connect the
camera with PC or USB adapter.
1. Connect the camera with the USB
cable as shown.
2. Connect the other end with the
USB adapter and plug it into a
power outlet or with the USB port
of PC directly for charging.
• When the battery is charging,
the LED indicator flashes.
• When the battery is fully
charged, the LED indicator goes
off.
• When the battery is unusual
charged, the LED indicator
flashes rapidly.
• When the camera charges
without the battery inside, the
LED indicator goes off.

It's recommended not operating the camera when charging. Actual
charging time depends on current battery capacity and charging
conditions.

You can also charge the battery with Apple adapter. Its power
output meets the standard 5V/500mA.

When the battery is removing during charging, it will recover
charging after you unplugging and replugging USB.
Turning the Power On and Off
There are two ways to turn on the camera:
•
The startup image displays briefly and the startup sound plays if enabled. The
zoom lens extends and the camera is turned on in Record mode.
•
The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the Power button .
See "Modes" on page 21 to know more about Record and Playback mode.