Minolta magicolor 2300 Series, Service Manual

Page: 114 / 144

114
✽
1: When displayed in service mode, the Prev. key can be used to scroll through the
options.
2-2. Settings menus
(1) Language menu
• The language in which messages are displayed can be changed.
(2) Special pages
(3) Engine menu
CONSUMABLE
USAGE BLACK TONER
YELLOW TONER
MAGENTA TONER
CYAN TONER
DRUM UNIT
Statistic Page A configuration page can be printed.
Demo Page A demonstration page can be printed.
Menu Map A menu chart page can be printed
Energy Saver
Set the length of time until the printer enters energy saver mode after it no
longer receives print jobs or is not operated.
If a print job is received while the printer is in energy saver mode, the printer
warms up, then returns to normal print mode before starting to print.
Auto Continue
When set to “On”, the printer continues printing even if the specified tray is
not loaded with paper of the correct size.
When set to “Off”, the printer stops and displays a message indicating that
paper of the correct size should be loaded into the specified tray if the speci-
fied tray does not contain paper of the correct size.
The Auto Continue setting can also be changed while printing. If this is done,
the setting will remain valid for future print jobs.
Chaining Tray
When set to “On”, the printer automatically switches to a different media tray
containing paper of the same size and type and continues printing if the
specified tray runs out of paper.
When set to “Off”, the printer stops and displays a message indicating that
paper should be loaded into the specified tray if the specified tray runs out of
paper.
The Chaining Tray setting can also be changed while printing. If this is done,
the setting will remain valid for future print jobs.
Change Toner
This is used when replacing the toner cartridge. By selecting the color of the
toner cartridge that you wish to replace (remove), the carousel automatically
stops so that the selected toner cartridge can be removed.