3
3-19
Network Setup
PServer Setup (NetWare Services)
The Enable PServer mode option must be selected if you have a Novell server
connected. You can, however, change the PServer polling interval and then modify
either Bindery Setup or NDS Configuration.
N
OTE
:
The terms NetWare server, Novell server, and IPX server are in common use and
are used here interchangeably to mean the server on an IPX network running Novell
NetWare networking software.
PServer Setup (NDS Configuration
)
In initial setup, the Pi5500 was connected to the network and an NDS directory tree,
with a Printer, a Print Server, and one or more Print Queue objects for Pi5500 jobs (see
page 4-7), was configured. You can make any changes to that setup through Command
WorkStation. To modify NDS Setup, you may need permission to browse the NDS
tree. If access to the Print Server is restricted, you will need a login password.
Enable NDS
Click this option if NDS has already been enabled on the network.
Change Trees...
Click to open the NDS Configuration window. This option is available only when
Enable NDS is selected.
Add NDS Tree
You can have only one NDS tree, so the following process is required to change
trees:
1.
Select the current NDS tree and click Remove.
2.
Select the new NDS tree and click Add.
Your new NDS tree selection automatically overwrites any previous tree
selection. If you change the NDS tree selection and there are also current
Bindery settings, you are alerted that they will be deleted. If you
continue with NDS Setup, you can replace Bindery settings afterwards.
To exit NDS Setup, choose Cancel.
3.
Click OK.
The Select login user window appears.
