3
3-18
Setting up the Pi5500 from a Windows Computer
T
O
CONFIGURE
PS
ERVER
S
ETUP
•
Click the Service1 tab in the Network Setup window.
You can modify NetWare 3.x (Bindery), and NetWare 4.x or 5.x (NDS) configurations
from Command WorkStation. Select the Enable NDS option if your network uses
NetWare 4.x or 5.x in native mode. Click Bindery Setup if your network uses
NetWare 3.x, or uses NetWare 4.x or 5.x in bindery emulation mode.
N
OTE
:
If your network uses
both
NDS and Bindery, set up NDS first. Setting up NDS
after Bindery will overwrite Bindery Setup. If your network uses both NDS and
Bindery, including using NetWare 4.x or 5.x servers in bindery emulation, the Pi5500
cannot service NDS and bindery emulation servers on the same NDS tree.
