2
2-49
Administrative functions in the Setup menu
T
O
CHANGE
THE
P
I
5500
PASSWORD
1.
Scroll the main Setup menu and choose Change Password.
2.
Enter and confirm the password, as described in the following section.
New Password
The password can be any combination of letters and numbers up to 19 characters.
Choose OK when you are done. Be sure to keep track of the password.
N
OTE
:
The only way to remove a password that you cannot remember is to reinstall
system software.
Verify New Password
Enter the new password again, exactly as before, to verify that you have entered it
correctly. The new password is effective until you change it again.
Clear Server
Clear Server enables you to clear all queued print jobs from the Pi5500—jobs in the
Pi5500 Print, Hold, and Printed queues. The Job Log is cleared at the same time. If
you keep Job Logs, be sure to print or export the Job Log before you choose Clear
Server.
Scroll the main Setup menu and choose Clear Server. You are asked to confirm your
selection. Jobs can also be deleted, individually or as a group, from Fiery WebSpooler.
Factory Defaults
Choose Factory Defaults to return the Pi5500 to its default factory settings. It also
clears all queued jobs from the Pi5500. The Job Log is cleared at the same time. After
the Pi5500 is reset, you select the language in which to display Setup menus and
system messages. Choosing Factory Defaults from the Control Panel will also return
the Windows NT 4.0 Point and Print Driver back to its original default settings.
Exit Setup
Choose Exit Setup from the main Setup menu when you have finished making Setup
changes. The Pi5500 will reboot. All changes will be saved on restart.
