FrameMaker Ver.5.5(PC) EP3000/EP3010 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.05.29
S-2
✽
For more details, see the “Operator’s Manual” shipped with the copier.
32
CONTROL PANEL KEYS AND TOUCH PANEL
32-1. Control Panel Keys
1. Display Contrast Knob
•
Varies the brightness of the Touch Panel.
2. User Mode Key
•
Changes the screen to the User Mode
setting screen.
3. Touch Panel
•
Shows various screens and messages.
4. 10-Key Pad
•
Numeric keypad used for entering the
number of copies to be made, zoom ratio,
access number, and the Tech. Rep. mode
settings.
5. Access Mode Key
•
When either “100 Accounts” or “1000
Accounts” has been selected for the
“Copy Track” function, the entry of the
access number and the press of this key
(Access Mode) will allow the user to make
copies.
6. Energy Saver Key
•
Sets the copier into the Energy Saver
mode.
7. Interrupt Key
•
Sets the copier into, or lets it leave, the
Interrupt mode.
8. Panel Reset Key
•
Clears all control panel settings made
previously, initializing the copier.
NOTE
It does not, however, clear the contents of
the zoom and job program memory and the
settings made immediately before the Inter-
rupt mode.
9. Clear Key
•
Clears the number-of-copies setting,
zoom ratio, and counter count.
10. Stop Key
•
Stops a copy cycle.
11. Start Key
•
Starts a copy cycle.
12. Mode Check Key
•
Shows the Mode Check screen on which
the user can check the current copying
settings.
13. Job Recall Key
•
Selects the Job Recall screen which
allows the user to recall or check a copy-
job program previously stored in memory.
1149O002EA
8
9
10
1
2
3
4
5
6
7
11
12
13
