17
16
4 – Exposure Compensation Using Rear Control Dial - (P
S
Mode
with Front Control Dial in P Mode)
Changes the tasking for the rear control dial to exposure compensation.
• The exposure compensation value is displayed in the meter index.
• Exposure compensation dial must be set to +/– 0.
• Compensation range is +/– 3 EV for both 1/2 and 1/3 EV increments.
• The bottom display in the viewfinder does not show the marks “+” or “_”.
Control Dial Tasking
Ps - shutter speed
Aperture
Shutter speed
Front Control Dial
Rear Control Dial
Exposure
Mode
P - Mode
A - Mode
S - Mode
Exposure
compensation
CUSTOM FUNCTIONS
• The aperture and shutter speed change in 1/2 or 1/3 EV increments depending on the
position of the exposure compensation dial.
• Flash can not be used with the P
A
and P
S
modes.
- Built-in and accessory flashes will not fire when the P
A
and Ps modes are active.
- P
A
and Ps modes can not be selected when
appears in the viewfinder.
• If the shutter speed or aperture blink, the required setting is not available. Turn the control
dial until the blinking stops.
While the aperture/shutter speed are displayed in P-mode…
Turn the front control dial to change
the shutter speed.
• Aperture is adjusted automatically.
Cancelling P
A
/ Ps Mode
Wait until the displayed data disappears from the data panel or raise
the built-in flash.
Turn the rear control dial to change the
aperture.
• Shutter speed is adjusted automatically.
Cust 18-2 Creative Program
P
A
/ Ps Mode Operation
After the AE system has been activated, you can change the shutter speed or
aperture selected by the camera. Creative program remains active until the data
panel display disappears.
Refer to page 13 to change the data panel display duration.
Custom Function Notes
English
