Minolta Dimage RD 3000 Page 78 Instruction Manual Download

Page: 78 / 129

FLASH

USING FLASH

Your camera has a Minolta standard accessory shoe for attaching dedicated flash
units (Accessory Information p.114).

Flash units can also be attached to the camera using a sync cord via the PC terminal.

The accessory flash’s AF illuminator will be activated when necessary.

Accessory Flash Notes

• To use a 1000 series AF flash unit, the Flash Shoe Adapter FS-1100 must be

attached to the camera. When the flash is on, the flash will fire each time the shutter
is released. At no time will the flash’s AF illuminator activate.

• The 5400HS, 5400xi, 3500xi, 3200i, and 5200i flashes zoom according to the focal

length of the lens.

• For the 5400HS, 5400xi, and 5200i flashes, the flash range and coverage angle

displays on the flash may not display focal lengths accurately.

• The flash range diagrams in the 3500xi and 3200i flash units are applicable for focal

lengths with this camera.

This camera has a Minolta standard accessory shoe.

ATTACHING AN ACCESSORY FLASH

Remove the cap from the
accessory shoe.

Align the flash’s mounting shoe
with the camera’s accessory
shoe, then slide the flash forward
until it locks firmly in place.

Summary of Contents for Dimage RD 3000


































































































































Search results

Summary of Contents for Dimage RD 3000

Reviews:

Related manuals for Dimage RD 3000

Brands by name

Popular brands

Minolta Dimage RD 3000, Instruction Manual

Search results

Summary of Contents for Dimage RD 3000

Reviews:

Related manuals for Dimage RD 3000

Brands by name

Popular brands