Minolta DI1610F User Manual Download Page 69

Page: 69 / 260

3.10 Checking the Machine Status

3-36

Di1610f

Chap

ter

3.10

Checking the Machine Status

The total number of pages printed and scanned since this machine was installed
can be checked.

Menu

Item

Description

TOTAL PAGE

TOTAL COUNT

Displays the total number of pages printed since
this machine was installed.

TOTAL SCAN

Displays the total number of pages scanned
since this machine was installed.
However, the scanned number of pages in copy
are not included.

TX PAGES

Displays the total number of pages faxed since
this machine was installed.

RX PAGES

Displays the total number of pages received
since this machine was installed.

TX/RX RESULT

TX RESULT REPORT

Displays the transmission result report.

RX RESULT REPORT

Displays the reception result report.

PRINT REPORT

TX RESULT REPORT

Prints the transmission result report.

RX RESULT REPORT

Prints the reception result report.

ACTIVITY REPORT

Prints the transmission/reception result report.

MEMORY DATA LIST

Prints the list of documents stored in the
memory.

MEMORY IMAGE PRINT

Prints the reduced image of the first page of the
document stored in the memory.

ONE-TOUCH LIST

Prints the recipients programmed in the one-
touch dial keys.

SPEED DIAL LIST

Prints the recipients programmed for the speed
dial numbers.

KEY SETTING LIST

Prints the settings specified for one-touch dial
keys.

MACHINE STATUS

Prints the current machine status.

CONFIGRATION PAGE

Prints the current machine configuration.

Summary of Contents for DI1610F





































































































































































































































































Search results

Summary of Contents for DI1610F

Reviews:

Brands by name

Popular brands

Minolta DI1610F, User Manual

Search results

Summary of Contents for DI1610F

Reviews:

Brands by name

Popular brands