Status, Error, and Service Messages
89
CANCELLING JOB
The Cancel key has
been pressed, and the
print job in the print
queue is being can-
celed.
Press Select and the job
in the print queue will be
canceled.
CREATED FILE
The accounting file has
been created.
No action needed.
CREATING
XXXXXXXXXXXX
FILE, WAIT...
The specified
accounting file is
created when
accounting is enabled
and the files are not in
existence or these files
are created following a
Reset Accounting
(
XXXXXXXXXXXX
represents the Job
Accounting or Paper
Accounting file).
Wait. No other action
needed.
DISK ERROR
This is an internal or
external hard disk error.
For example, when both
an internal hard disk
and Jaz drive are
installed,
%disk1%
Disk Status
shows
0 (zero) K for the Jaz
drive size, preventing
backup of the hard disk
to the Jaz drive.
In order to back up the
hard disk contents to a
Jaz drive, you must
increase the Disk Cache
manually to at least
1 MB. For more
information about
increasing the memory
in the Disk Cache, refer
to the CrownBooks in
PDF on the Documenta-
tion CD-ROM.
DUPLEX <
X
>
The specified message
<X>,
such as
DUPLEX
MEDIA ERROR
, in the
duplexer needs
attention.
Locate and resolve the
message.
END JOB
The Cancel key has
been pressed and the
End Job option
selected.
Press Select to provide
an end-of-job indicator
for a print job that does
not have one.
This message...
means...
do this...
Summary of Contents for PagePro 9100
