MINOLTA-QMS PagePro 9100, User Manual

Page: 68 / 192

Understanding Media Jam Status Messages 62
Understanding Media Jam Status Messages
When a jam occurs, the message window on the control panel displays one
of these messages:
„
Media input jams
MEDIA JAM UPPER TRAY, MEDIA JAM OPTIONAL1(OR 2 OR 3)
TRAY, MEDIA JAM MPT
„
Internal media jams
MEDIA JAM FUSER, MEDIA JAM DRUM, MEDIA JAM DUPLEX,
MEDIA JAM DUPLEX FEEDER, MEDIA JAM TRANSPORT
„
Output media jams
MEDIA JAM MAIL BIN
Frequent jams in any area indicate that area should be checked, repaired, or
cleaned. Frequent jams may happen if you’re using the wrong weight print
media.
Clearing Media Input Jams
Messages:
MEDIA JAM UPPER TRAY, MEDIA JAM OPTIONAL1(OR 2 OR 3)
TRAY, MEDIA JAM MPT
„
To avoid damage, always remove jammed media gently, without tearing it.
Any pieces of media left in the printer, whether large or small, can obstruct
the media path and cause further jams.
„
To avoid damage to rollers, always remove jammed media gently.
„
Do not reload media that has jammed.
Attention
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the print face when removing the jammed media.
Make sure not to spill any toner inside the printer.
Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as much as
possible. If some toner remains on your clothes, use cool, not hot, water to