MINOLTA-QMS PagePro 9100, User Manual

Page: 155 / 192

Requirements
149
5 "
A surface can be tested for levelness with a standard round pencil.
If the pencil rolls, the surface is not level. Clear the area of any
obstruction or items such as cables that might prevent the printer
from sitting directly on the flat, level surface.
„
If the printer is located in a cold room that is rapidly heated, or if the printer
is moved from a cold place to a warm, humid place, condensation may
occur within the printer, degrading print quality. If this occurs, allow the
printer to adapt to the environment for about one hour before use.
„
If using a humidifier or water vaporizer in the room with the printer, use
only purified or distilled water. Impurities in the water may be released into
the air, where they can accumulate inside the printer and cause degraded
printer output.
Attention
For products installed outside North America, do not connect the
groundwire to gas or water pipes or grounding for telephones.
WARNING!
Obstructing the ventilation grilles could present a fire hazard.
ACHTUNG! Abdeckung der Ventilator-Schlitze kann ein Feuer auslösen.
Power Requirements
WARNING!
Connect the power plug to an outlet with the same rated voltage as the
printer (120 or 240 V), and fused for at least 15 amperes (4 amperes for
240 V). No other devices should be connected to this outlet, as
overheating could cause fire or electric shock. The printer draws 8 A at
120 V, or 4 A at 240 V. Your printer requires a properly grounded AC
outlet with a rated line voltage of 120 V or 220–240 V. The grounding
terminal on the power cable should be connected to a good earth
ground to prevent electric shock and fire.
ACHTUNG! Schließen Sie das Netzkabel an eine Stromquelle an, die
gleiched Voltzahl wie der Drucker hat (120 oder 240 V) und mindestens
15 Ampere gesichert ist (4 Ampere für 240 V). Schließen Sie keine
anderen Geräte an diesen Ausgang an, da sonst als Folge von
At an altitude of 0–10,170'
(0–3,100m). Excessive vibration.
With these characteristics... But away from...