MINOLTA-QMS PagePro 9100, User Manual

Page: 127 / 192

SCSI Interface
121
8
Reconnect the power cord, and turn
on the printer.
5 "
In compliance with UL
guidelines, “The appliance
inlet is considered to be the
main disconnect device.”
9
Print a startup page.
Check that the startup page lists the
interface (Optional NIC) just installed under “Printer Interfaces.”
Using a Network Interface
Once a network interface is installed, refer to “Connecting the Printer to the
Host Computer,” in the Installation Guide and the CrownBook for information
on connecting to the network, installing the software, and configuring the
interface and the network.
SCSI Interface
The optional SCSI interface allows you to connect an optional SCSI devices,
including a hard disk, and Jaz and Zip drives. These devices provide storage
for fonts, emulations, and other files; increase the number of pages that can
be collated; and provide a secondary storage area for spooled data, while
providing virtual memory capabilities.
In order to back up the hard disk contents to a Jaz drive, you must increase
the Disk Cache manually to at least 1 MB. For more information about
increasing the memory in the Disk Cache, refer to the (in PDF on the
Software Utilities CD-ROM).
What's in the SCSI interface kit?
An optional SCSI interface kit includes the following:
„
SCSI interface card
„
SCSI interface card ribbon cable
„
Connector face plate
„
Two larger screws, two smaller screws