MINOLTA-QMS PagePro 9100, User Manual

Page: 124 / 192

Emulations, Fonts, and Other Software 118
z
KanjiTalk, version J1-6.0.7 or later
z
System File, version J1-6.0.7 or later
z
Laser Prep, version J1-6.0.1 or later
z
LaserWriter, version J1-6.0.2 or later
z
Print Monitor, version J1-1.3 or later
z
MultiFinder, version J1-6.1.7 or later
z
Macintosh OS 8.xJ
„
If you’re using a PC, the following system software:
z
If you’re using Windows, version 3.1J or later
z
If you’re using DOS, version 5.0J or later
Installing a Kanji Font Internal IDE Hard Disk Drive
Attention
The Kanji fonts are factory installed on a formatted hard disk drive. DO
NOT reformat or initialize the Kanji internal IDE hard disk drive.
Reformatting erases all data, fonts, and files on the disk. Your warranty
does not cover this error.
The Kanji font internal IDE hard disk is installed on the controller board in the
same way any internal hard disk is installed. See “Internal IDE Hard Disk
Drive” on page 123 for detailed steps on installing an internal IDE hard disk
drive.
Attention
If you already have an internal hard disk installed, you must remove it
before you can install the Kanji disk.
Configuring the Printer for Kanji
See “Storage Devices” in the CrownBooks in PDF on the Documentation
CD-ROM for information on how to configure your printer’s memory when
using an internal IDE hard disk drive.