MINOLTA-QMS PagePro 9100 User Manual Download Page 100

Page: 100 / 192

Status, Error, and Service Messages

HP-GL Error Codes and PCL Error Codes

The following tables list error codes that could appear on the printer message
window when running the HP-GL, PCL or PCLXL emulation.

HP-GL

PCL

Error

Code

Description

Error
Code

Description

Not enough memory for job.

Not enough memory for
job.

Too many transformations.

State lost.

Math error.

Job aborted.

Instruction not recognized.

Out of memory for macros.

Wrong number of para-
meters.

Disk full. Cannot store
fonts.

Out of range parameter, or
illegal character.

6–13

Internal error 1–8.

Not used.

Unknown character set.

Position overflow.

Buffer overflow.

Not used.

PCLXL

Error
Code

Description

Not enough memory for
job.

Math error.

2–7

Internal error 1–6

Summary of Contents for PagePro 9100

































































































































































































Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands

MINOLTA-QMS PagePro 9100, User Manual

Search results

Summary of Contents for PagePro 9100

Reviews:

Related manuals for PagePro 9100

Brands by name

Popular brands