MINOLTA-QMS PagePro 9100, Installation Manual

Page: 60 / 80

Installing Printer Drivers and Utilities, Windows 52
Windows—Ethernet TCP/IP
Detailed instructions for configuring TCP/IP can be found in the CrownBooks
(in PDF on the Documentation CD-ROM).
DHCP Installation
5 "
If you use DHCP to install TCP/IP, you must enable DHCP/WINS in
Administration/Communications/Optional NIC/CrownNet/TCPIP
printer configuration menu. See your network administrator and your
CrownBooks on your Documentation CD-ROM for further information.
Manual TCP/IP Installation
1
Connect your printer to the network with an Ethernet cable.
2
If necessary, in the Administration/Communications/Optional NIC/
CrownNet/TCPIP/Internet Address menu, enter the printer’s Internet
address.
The factory default Internet address is 161.33.128.24. If necessary, in the
Administration/Communications/Optional NIC/CrownNet/TCPIP/Default
Router menu, enter the Internet address.
The factory default router address is 000.000.000.000. This setting
provides automatic sensing of gateways. If you identify a subnet mask,
automatic sensing is disabled.
3
If you want to refer to the printer by host name instead of IP address, edit
the system host table by adding the following line to the host file:
internetaddress hostname
where
internetaddress
is the Internet address of the printer
(Administration/Communications/Optional NIC/CrownNet/TCPIP/Internet
Address menu), and hostname is the descriptive name of the printer. This
requires administrator privileges on your network. Contact your system
administrator.
4
Insert the Software Utilities CD-ROM.
5
Select Printer Setup.
6
Select the option First Time Setup.
When in the first window, click the Printer Setup link.
7
Or, select In Use and select a TCP/IP connection.
a
Select “Custom” for installation of Printer Management Utilities, and
for Printer Driver Software.
b
Click
Next
.