MINOLTA-QMS PagePro 9100, Installation Manual

Page: 44 / 80

Warranty Considerations 36
English
Warranty Considerations
Various factors can affect a printer’s warranty, such as electrostatic damage,
unsupported consumables, and other actions listed on the following page.
Read your printer warranty carefully. For information about your warranty, go
to www.minolta-qms.com/support, then click on the Answer Base.
If MINOLTA-QMS printer failure or damage is found to be directly attributable
to the use of non-MINOLTA-QMS approved consumables, print media, and/or
accessories, MINOLTA-QMS will not repair the printer free of charge. In this
case, standard time and material charges will be applied to service your
printer for that particular failure or damage.
Attention
Don’t return any merchandise to the manufacturer without calling for a
Return Merchandise Authorization (RMA) number. Refer to the Service
& Support Guide for the Support telephone number where you can
obtain an RMA number. If the RMA number is not prominently visible
on the outside carton of items returned, MINOLTA-QMS will not accept
receipt.
These Actions Will Result in Voiding Your Warranty
Print Media Use of nonsupported such as coated color transparencies
(OHP) or inkjet paper.
See chapter 2, “Using Media,” in the User’s Guide for
approved media. Contact your local vendor or
www.minolta-qms.com for purchase information.
Electrostatic
Discharge Failure to protect the printer controller board and any
associated daughterboard or module from electrostatic
discharge or damage while performing any task involving
the controller board.
Instructions Failure to follow instructions in the printer documentation.
Modifications Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for
compliance to Federal Regulations could void your
authority to operate this product within the Laws and
Regulations of the Federal Communications Commission.
Consumables Use of consumables not manufactured or supported by
MINOLTA-QMS. Any damage to the printer or quality
problems caused by a refilled toner cartridge use.
Toner Cartridge Any damage resulting from mishandling the toner cartridge
(including its OPC) or the transfer roller.
Accessories Use of accessories not manufactured/supported by
MINOLTA-QMS.