MINOLTA-QMS PagePro 9100, Installation Manual

Page: 34 / 80

Accessories and Consumables 26
English
If you’ve followed all of the instructions and still have problems you can’t
solve, refer to the User’s Guide or see the Service & Support Guide for how to
contact the MINOLTA-QMS office closest to you.
Accessories and Consumables
Contact your local vendor or www.minolta-qms.com for purchase information,
parts numbers, and pricing.
Accessories
You can’t print
a status page. The tray does not have
media. Check that the media trays are
loaded with media, in place, and
secure.
The media tray’s cover
isn’t closed securely. Make sure the media tray cover is
closed gently and securely. Avoid
jarring the printer.
The media is jammed. Check for a media jam.
The printer is
printing codes
or not printing
at all when in
ESP mode. The printer emulation is
not correct. Reconfigure the port to the specific
printer emulation of the file you are
trying to print.
Your ESP timeout is too
short. If a PostScript file prints PostScript
statements while the printer is in
ESP mode, increase the ESP
timeout in the Administration/
Communications/Timeouts/ESP
Timeout menu.
Printouts
seem faded on
one side of the
page. The printer is not on a
level enough surface. Level the printer surface. It should
not exceed ±1° slant in any
direction (for example, a round
pencil laid on the surface shouldn’t
roll in any direction).
Description Remark(s)
4-bin Mailbox
BuzzBox Via parallel connection for 100, 120, and
220 volts
CGM Emulation (requires hard disk)
CrownNet for Ethernet
10BaseT/100BaseTX Interface Equipped with RJ45 connector
Symptom Cause Solution