10
Maintaining the printer
10-10
8
Close the top cover and press it
down gently but firmly until it locks
into place.
Resetting the counter for the drum cartridge
After you have replaced the drum cartridge, reset the drum cartridge
counter.
✎
The counter can also be reset via the Counter tab in the Printer
Control Panel!
See chapter 6 or the Printer Control Panel’s online help.
1
Turn off the printer.
2
While holding down the panel button, turn on the printer.
The green “Ready” indicator begins to blink.
3
Continue holding down the panel button, and the green “Ready” indi-
cator starts to blink.
4
After the green “Ready” indicator has blinked for about 5 seconds, re-
lease the panel button.
Both indicators begin to blink.
5
After confirming that both indicators are blinking, briefly press the pan-
el button.
Both indicators light up for about 5 seconds, and then both indicators
begin to blink.
The counter for the drum cartridge has now been reset.
6
Turn the printer off and then on again.
Once the green “Ready” indicator remains on, the printer is again in
Stand-by mode.
