manualshive.com logo in svg

MINOLTA-QMS MAGICOLOR 6110, User Manual

Share
Download
MINOLTA-QMS MAGICOLOR 6110 User Manual Download Page 111

Status, Error, and Service Messages 

109

HP-GL Error Codes and PCL Error Codes

The following tables list error codes that could appear on the printer message 
window when running the HP-GL, PCL or HPXL emulation. 

HP-GL

PCL

Error 

Code

Description

Error 
Code

Description

0

Not enough memory for job.

0

Not enough memory for job.

1

Too many transformations.

1

State lost.

2

Math error.

2

Math error.

3

Job aborted.

3

Job aborted.

4

Instruction not recognized.

4

Out of memory for macros.

5

Wrong number of parame-
ters.

5

Disk full. Cannot store fonts.

6

Out of range parameter, or 
illegal character.

6–13 Internal error 1–8.

7

Not used.

8

Unknown character set.

9

Position overflow.

10

Buffer overflow.

11

Not used.

HPXL

Error 
Code

Description

0

Not enough memory for job.

1

Math error.

2–7

Internal error 1–6

Summary of Contents for MAGICOLOR 6110

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands