manualshive.com logo in svg

MINOLTA-QMS MAGICOLOR 2210, User Manual

Share
Download
MINOLTA-QMS MAGICOLOR 2210 User Manual Download Page 91

Status, Error, and Service Messages 

89

FUSER OIL 

EMPTY

The fuser oil roller for the fuser 
is depleted. The printer will not 
print any more copies until a 
new fuser oil roller is installed.

Install a new fuser 
oil roller.

IDLE

The printer is on line, but no 
jobs are in process.

No action needed.

INITIALIZING

The printer is warming up and 
getting ready to go on line.

Wait. No other 
action needed.

INPUT BIN JAM

Input bin jams occur in the 
input bin.

Locate and 
remove the jam.

INPUT IDLE

PRINTING

The printer is on line and print-
ing jobs already in the queue. 
No new jobs are arriving at the 
communication interfaces.

No action needed.

MAILBIN POWER 

OFF

The mailbox unit power is off.

Turn off the printer, 
turn on the mail-
box unit, then the 
turn on the printer.

This message...

means...

Do this...

Summary of Contents for MAGICOLOR 2210

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands