MINOLTA-QMS MAGICOLOR 2210 User Manual Download Page 136

Page: 136 / 176

Media Trays

134

Lift up bracket B and secure it tightly
with the thumbscrew.

Make sure the bracket matches the
position shown in the illustration.

Slide the upper media tray back into
the printer.

Media Trays

The printer comes with a 150-sheet multipurpose tray (tray 1), and a
500-sheet media tray (the upper tray—tray 2). The optional lower feeder unit
has another 500-sheet optional media tray that provides two main benefits:

„

Expanded flexibility to switch media size, color, and type without having to
unload and load media.

„

Increased media-feed capacity

Keep 500-sheet replacement trays close by, so you can easily change media
by slipping one tray out and another in.

Media trays accommodate only letter/A4/legal media.

Installation

Slide the existing media tray open.

Summary of Contents for MAGICOLOR 2210

















































































































































































Search results

Summary of Contents for MAGICOLOR 2210

Reviews:

Brands by name

Popular brands

MINOLTA-QMS MAGICOLOR 2210, User Manual

Search results

Summary of Contents for MAGICOLOR 2210

Reviews:

Brands by name

Popular brands