MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 55 / 134

Selecting Printer Features 55
%%IncludeFeature: orientation (landscape)
%%IncludeFeature: booklet (2 vertical 3600 0)
Printing Borders
The border command prints a border around the page margins of each logical page. This
is useful for distinguishing logical pages when N-Up printing is enabled.
Terminology
Border — The rectangles formed after applying the physical sheet size, orientation,
margins, number of rows and columns, and the row and column spacing (in that order) are
called logical page spots. When borders are selected, they are drawn at the logical page
spot.
Logical page — The image that is produced by the emulation (also called logical sheet).
When no layout is selected, it corresponds to the physical page (the paper size or paper
type), but when a complex layout is selected, it is one of the images that gets mapped to a
physical page within the borders.
Syntax
%%IncludeFeature: border (< value>)
<value> Number of pixels of border width
Range: 0 to 7200
Default
%%IncludeFeature: border (0)
Notes The border is measured in centipoints (1/7200")
6
4
5 Front
Face
Back
Face
3 8
2
7
1
First Sheet Second Sheet
1 8
2
7
3 4
5
6
Folded Sheets