MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 46 / 134

Selecting Printer Features 46
Stapling Print Jobs
The staple command allows you to use the stapling option on a stacker if your printer
supports this option. The command will also determine the location of the staple if the
printer supports this capability. See your printer documentation for more information on
stapling.
Page Layout Commands
Page layout commands are used to control how logical pages are placed onto the physical
sheet. They control page size, margins, page orientation, page scaling, page offsets,
number-up, booklet, border and background printing.
Setting the Page Size
The pagesize command sets the size of the logical pages mapped to the proportions of the
physical sheet of paper used by the current print job.
Notes In some environments where multiple documents are shipped by the host appli-
cation to construct a single user document, the host application may try to over-
ride the default offset stacking feature to avoid print collation errors.
Default on
Syntax %%IncludeFeature: staple (< setting>)
<setting> none | front | back | both | on | off
2425, 3260, and 4032 printer choices: front | back | center | on | off
Notes When using this command it is recommended that the collation feature (collate)
is on or that the number of copies (numcopies) is set to a value greater than one.
2425 printers: The “on” setting is equivalent to the “back” setting.
3260 and 4032 printers: The “on” setting is equivalent to the “front” setting.
Default Printer specific
Syntax %%IncludeFeature: pagesize ( <page>)
<page>
The <physical> paper sizes supported by the printer:
<physical> ::==
Letter | Legal | Ledger | Executive | A5 | A4 | A3 | B5 | B4