MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 31 / 134

Header and Trailer Pages 31
IncludeFeature Command
This statement invokes the standard document formatting options available on the printer.
See chapter 3, “Selecting Printer Features” for more information on these options.
EndComments Command
Use this statement at the end of the DOC prologue.
Notify Command
Use this command to send notification of the print job completion to the specified email
address.
Syntax
%%IncludeFeature: {<feature>[(option)]}
<feature> duplex | collate | numcopies | input | output | header | trailer | oientation | emula-
tion | pagerange | margins | pagesize | pageorintation | pagegrid | pageoffsets |
staple | background | border | pagescaling | booklet | resolution | newlayout | off-
set | quality | colormodel | colorseparation | mediatype
<option> text
Notes
The list of features available for this command can be extended with the addition
of software emulation options on your printer. See chapter 4, “Selecting Emula-
tion Features.”
Syntax
%%EndComments
Notes Marks the end of the DOC prologue and the beginning of the print job’s data. All
data after the %%EndComments command is handled by the selected emula-
tion.
This command should be used only to prevent further processing of document
option commands. The DOC prologue is terminated when a line is encountered
that does not begin with %% or %!.
Syntax
%%Notify: (email <address>)
<address> Any valid email address up to 80 characters in length.
Default
None