MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 115 / 134

Selecting Emulation Features 115
Font Selection
The font command specifies the font that is to be used to print the current job. Any of the
PostScript fonts that are resident on the printer can be used. Downloaded PostScript fonts
cannot be used.
Font Point Size
The pointsize command specifies the point size of the font that is to be used to print the
current job.
Character Map
The map command specifies either the ASCII or EBCDIC mapping system.
Syntax %%IncludeFeature: font (< name>)
<name>
The name of the font. Refer to the printer documentation for a list of resident
PostScript fonts.
Default
Courier
Syntax %%IncludeFeature: pointsize (< size>)
<size>
The size, in points, of the current font.
Range:4 - 256 points
Fractional point sizes are allowed.
Default
8.8 points (13.63 characters per inch)
In portrait orientation, the default font (Courier) at its default point size yields 111
columns per page (105 columns per page with line numbering on).
In landscape orientation, the default font (Courier) at its default point size yields
145 columns per page (139 columns per page with line numbering on).
Syntax %%IncludeFeature: map (< setting>)
<setting> Type of character map:
ASCII - use ASCII mapping
EBCDIC - use EBCDIC mapping
Default
ASCII