MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 106 / 134

Selecting Emulation Features 106
Select Font Index Command
Select Symbol Set Command
Syntax
%%IncludeFeature:fontid (index #
)
Purpose Specifies the default font index number.
Notes This index is used when the Default Font selected is selectbyid. This allows for
selection of fonts only on the current resource. Selection of default font by index
overrides the symbol set value. The symbol set is overridden if a bound font is
selected as the default or if an unbound font is selected that does not support
the default symbol set. If a font with the specified index exists, it is selected as
the Default Font. If the specified value does not exist, courier 12 point is substi-
tuted.
Variable index #
Purpose Specifies the index number of the default font.
Range 0 to 32767
Default Selectbyid-dependent
Format Integer
Syntax %%IncludeFeature: symbolset (name)
Purpose
Specifies the default symbol set for the emulation.
Notes This command specifies the default symbol set. Not all symbol sets are available
with certain resident fonts. In particular, the Desktop, PS Math, Math 8, Microsoft
Pub, Pi Font, PS Text, Ventura Intl, Ventura Math, Ventura US, and Windows
symbol sets cannot be used with the resident bitmap fonts: courier10,
courier10bold, courier10italic, courier12, courier12bold, courier12italic, and line-
printer.
If a mismatch between symbol set and font occurs, the standard PCL font selec-
tion mechanism is used to locate a font that matches the selected symbol set.
With the standard set of fonts distributed, this matches the Times* font, but other
user installed fonts could change this result.
Variable name
Purpose Specifies the symbol set name.