CONNECTING A UNIVERSAL SONAR ExTENSION CABLE
Four Pin Connector
Universal Sonar
Cable from
Control Head
NOTE:
Your fish finder should be turned
off until this procedure is complete.
2
Four Pin Connector
Universal Sonar Cable
from Control Head
Universal Sonar
Extension Cable
Locking Collar
d. Align the pins of the Universal Sonar connector
plug from the Control Head with the matching
socket end of the appropriate Universal Sonar
Extension Cable for your fish finder. Firmly
push the connector plug into the socket of the
Universal Sonar connection. Twist the locking
collar until it is snug.
e. Connect the other end of your adapter plug to
your fish finder following the manufacturer’s
instructions.
NOTE:
If the cable length does not reach the desired
fish finder installation location, a 14.5’ extension cable
is available (MKR-US2-11) (sold separately).
a. Place the motor in the stowed position.
b. Locate the Universal Sonar, if equipped, at the
base of the Mount.
c. Locate the Universal Sonar four pin connector at
the end of Universal Sonar Extension Cable. The
connector is black with a stainless steel threaded
locking collar.
1
NOTE:
The connectors are keyed to prevent reversed
installation.
Control Head
Coil Cord
Mount
Universal
Sonar
The Universal Sonar Cable may not be long enough to reach the fish finder. If the cable length does not reach the desired fish
finder installation location, a 14.5’ extension cable is available. Minn Kota recommends using the MKR-US2-11.
Connecting a Universal Sonar Extension Cable
