-1-
-4-
2018.02.07
IME-EW-01
EW-01
WORK MARKER
Read following instructions thoroughly before attempting to use.
Keep this manual always in the vicinity of use for your reference.
Before using the unit, check if there are any damages on the unit due to
transport conditions.If any damages are found, contact our minimo dealer.
WARNING
(Indicates that incorrect operations presents significant danger of
accident resulting in death or serious injury to the user.)
SAFETY PRECAUTIONS
Wear an appropriate eye protection and a dust protecting mask when using the
handpiece.
Use the compressed air with the pressure 4
～ 7 kgf / ㎠ (56 ～
99psi)
Do not disassemble and remodel the unit.
Any accident or malfunction caused by disassembling and/or remodeling will
not be covered by our responsibility.
Do not touch the point tool when vibrating.
○
○
○
○
WARNING
(Indicates that incorrect operations presents significant danger of
accident resulting in death or serious injury to the user.)
CAUTION
(Indicates that incorrect operation presents possibility of injury to the
user or damage to the unit.)
Never push the point tool hard onto the workpiece.
Excessive force on the tool will cause damage to the tool and also reduce the
cutting power.
Employ the air filter and/or dryer to eliminate water, water vapor and any other
dust particle in the compressed air.
Avoid any heavy impact to the unit. Do not drop it!
Keep the unit away from children.
○
○
○
○
6. PARTS LIST
1.Point Tool
EW-101
2.Bush
EW-102
3.O-Ring
EW-103
4.Front Housing
EW-104
5.Front Spring
EW-105
6.O-Ring (7.66×1.78)
EW-106
7.O-Ring (12.1×1.6)
EW-107
8.O-Ring (2.5×1.8)
EW-108
9.Valve Ball
EW-109
10.Switch Valve
EW-110
11.O-Ring (3.1×1.6)
EW-111
12.Ball Guide
EW-112
13.Rear Spring
EW-113
14.Housing
EW-114
15.O-Ring (11.1×1.6)
EW-115
16.Rear Housing
EW-116
17.Hose Connector M7
EW-117
18.Air Hose Black 2.5m
EW-118
19.Hose Connector 1/4
EW-119
20.Coupler
EW-120
21.Bronze Bush
EW-121
