background image

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

INSTRUCTION MANUAL

READ FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO USE.

READ FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO USE.

READ FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO USE.

READ FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO USE.

READ FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO USE.
ALSO  READ THE INSTRUCTION MANUAL OF THE HANDPIECE AS WELL.

ALSO  READ THE INSTRUCTION MANUAL OF THE HANDPIECE AS WELL.

ALSO  READ THE INSTRUCTION MANUAL OF THE HANDPIECE AS WELL.

ALSO  READ THE INSTRUCTION MANUAL OF THE HANDPIECE AS WELL.

ALSO  READ THE INSTRUCTION MANUAL OF THE HANDPIECE AS WELL.
KEEP THIS MANUAL ALWAYS IN THE VICINITY OF USE FOR YOUR REFERENCE.

KEEP THIS MANUAL ALWAYS IN THE VICINITY OF USE FOR YOUR REFERENCE.

KEEP THIS MANUAL ALWAYS IN THE VICINITY OF USE FOR YOUR REFERENCE.

KEEP THIS MANUAL ALWAYS IN THE VICINITY OF USE FOR YOUR REFERENCE.

KEEP THIS MANUAL ALWAYS IN THE VICINITY OF USE FOR YOUR REFERENCE.
BEFORE USING THE UNIT, CHECK IF THERE ARE ANY DAMAGES ON THE UNIT DUE TO TRANSPORT

BEFORE USING THE UNIT, CHECK IF THERE ARE ANY DAMAGES ON THE UNIT DUE TO TRANSPORT

BEFORE USING THE UNIT, CHECK IF THERE ARE ANY DAMAGES ON THE UNIT DUE TO TRANSPORT

BEFORE USING THE UNIT, CHECK IF THERE ARE ANY DAMAGES ON THE UNIT DUE TO TRANSPORT

BEFORE USING THE UNIT, CHECK IF THERE ARE ANY DAMAGES ON THE UNIT DUE TO TRANSPORT
CONDITIONS. IF ANY DAMAGES ARE FOUND, CONTACT OUR MINIMO DEALER.

CONDITIONS. IF ANY DAMAGES ARE FOUND, CONTACT OUR MINIMO DEALER.

CONDITIONS. IF ANY DAMAGES ARE FOUND, CONTACT OUR MINIMO DEALER.

CONDITIONS. IF ANY DAMAGES ARE FOUND, CONTACT OUR MINIMO DEALER.

CONDITIONS. IF ANY DAMAGES ARE FOUND, CONTACT OUR MINIMO DEALER.

SAFETY      PRECAUTIONS

WARNING 

(INDICATES THAT INCORRECT OPERATION PRESENTS

SIGNIFICANT DANGER OF ACCIDENT RESULTING IN DEATH OR SERIOUS

INJURY TO THE USER.)

CAUTION 

(INDICATES THAT INCORRECT OPERATION PRESENTS

POSSIBILITY OF INJURY TO THE USER OR DAMAGE TO THE UNIT.)

○ WEAR AN APPROPRIATE EYE PROTECTION AND A DUST PROTECTING MASK WHEN USING THE HANDPIECE.
○ DO NOT PLACE THE POWER PACK ON A STAND WHICH IS TILTED OR TOTTERY.
○ TURN OFF THE MAIN SWITCH IMMEDIATELY AND UNPLUG THE A.C.CABLE WHEN ONE OR MORE OF THE FOLLOWINGS
   ARE RECOGNIZED; SMOKING, NASTY SMELL AND STRANGE NOISE FROM THE POWER PACK.
○ NEVER TOUCH THE PLUG AND THE UNIT WITH WET HANDS.
○ DO NOT DISASSEMBLE AND REMODEL THE UNIT. ANY ACCIDENT OR MALFUNCTION CAUSED BY DISASSEMBLING
   AND/OR REMODELING WILL NOT BE COVERED BY OUR RESPONSIBILITY.
○ NEVER USE THE POWER PACK WITH THE INPUT VOLTAGE OTHER THAN THE ONE INDICATED ON BACK OF THE UNIT.
○ DO NOT COVER AND/OR SEAL THE VENTILATOR.
○ REPLACE THE POWER CABLE WITH NEW ONE WHEN DAMAGED. IT MAY CAUSE A SHORT CIRCUIT, ELECTRIC SHOCK OR
   FIRE IF THE DAMAGED CABLE IS CONTINUED TO BE USED.

○ DO NOT USE THE THE POWER PACK IN EXCESSIVELY HUMID PLACE.THE CONDENSAION OF VAPOR ON OR INSIDE OF
   THE UNIT CAUSES A MALFUNCTION, A SHORT CIRCUIT, FIRE AND A ELECTRIC SHOCK.
○ DO NOT USE THE POWER PACK WHERE CORRESIVE GASES AND CHEMICALS POSSIBLY EXIST.
○ THE AMBIENT TEMPARATURE SHOULD BE IN THE RANGE OF 0°〜 40°C.
○ KEEP THE UNIT AWAY FROM CHILDREN.
○ AVOID ANY HEAVY SHOCK TO THE POWER PACK. DO NOT DROP IT!
○ KEEP ANY LIQUIDS (OIL,WATER,ETC.) OFF THE UNIT.    IF ANY LIQUID HAPPENS TO GET INTO THE UNIT,
   STOP THE OPERATION AND CONTACT YOUR NEAREST DEALER FOR REPAIR.
○ DO NOT PUT ANY HEAVY GOODS ON THE CABLE.
○ AVOID EXPOSURE TO DIRECT RAY OF THE SUN, HOT BLAST, OR HEATER AIR.
○ WHEN UNPLUGGING,ALWAYS HOLD THE PLUG (NOT THE CABLE) AND PULL.
○ ALWAYS UNPLUG THE A.C CABLE WHEN REPLACING THE FUSE,CLEANNING UP THE UNIT,OR DOING ANY OTHER
   MAINTENANCE FOR THE UNIT.
○ DO NOT USE BENZINE, ALCOHL, PAINT THINNER OR OTHER VOLATILE SOLVENT TO CLEAN THE UNIT.
○ ALWAYS UNPLUG THE A.C. CABLE WHEN LEAVING YOUR WORKSHOP.

POLYTOR POWER PACK           P201/P211/P221

- 1 -

inimo   1   SERIES

ONE

Summary of Contents for P201

Page 1: ...NS WARNING INDICATES THAT INCORRECT OPERATION PRESENTS SIGNIFICANT DANGER OF ACCIDENT RESULTING IN DEATH OR SERIOUS INJURY TO THE USER CAUTION INDICATES THAT INCORRECT OPERATION PRESENTS POSSIBILITY OF INJURY TO THE USER OR DAMAGE TO THE UNIT WEAR AN APPROPRIATE EYE PROTECTION AND A DUST PROTECTING MASK WHEN USING THE HANDPIECE DO NOT PLACE THE POWER PACK ON A STAND WHICH IS TILTED OR TOTTERY TURN...

Page 2: ...ER SUPPLY LAMP GREEN LIGHT WILL BE ON WHEN THE MAIN SWITCH IS ON INDICATING THE INPUT POWER SUPPLY SPEED CONTROL KNOB TO CONTROL THE ROTATION SPEED OF THE HANDPIECE ROTATION SWITCH TO SWITCH THE DIRECTION OF THE ROTATION OF THE DC MOTOR C W FOR CLOCKWISE AND C C W FOR COUNTER CLOCKWISE ON OFF SWITCH TO CONTROL ON OFF ON THE FRONT PANEL OF THE POWER PACK ONE PUSH TO BE ON AND ANOTHER PUSH TO BE OFF...

Page 3: ...BE GREEN HOLD THE HANDPIECE FOR SURE AND DEPRESS THE PEDAL OF THE FOOT SWITCH TO START THE MOTOR TURN THE SPEED CONTROL KNOB TO ADJUST THE MOTOR SPEED TO THE APPROPRIATE POSITION FOR YOUR WORK FOR VC301 VARIABLE SPEED CONTROL TYPE DEPRESS THE PEDAL ALL THE WAY AND WITH KEEPING THE POSITION ADJUST THE SPEED WITH SPEED CONTROL KNOB TO THE APPROPRIATE SPEED FOR YOUR WORK THEN CONTROL THE SPEED WITH T...

Page 4: ... THE HANDPIECE IS IN SET POSITION CHECK WHETHER THE FOOT SWITCH IS CONNECTED OR NOT WHEN THE FOOT SWITCH IS CONNECTED THE REMOTE SWITCH AND ON OFF SWITCH WILL NOT OPERATE IF THE OVERLOAD ALERM CANNOT BE RESET P201 P211 P221 SPECIFICATIONS INPUT VOLTAGE P201 AC100V 5 50 60 Hz P211 AC115V 5 50 60 Hz P221 AC230V 5 50 60 Hz POWER CONSUMPTION RATING 44 W MAX 135 W OUTPUT VOLTAGE DC 3 30V AC MAX 80V 25 ...

Reviews: