miniland 89061, Manual

Page: 10 / 44

10
ENGLISH
5 INSTRUCTIONS FOR USE
This is a bath and room thermometer with a high and low water
temperature alarm and a Clock with timer and stopwatch functions. The
main function of this bee is to measure the bath water temperature. When
put into the bath water, it automatically comes on and the screen displays
the water temperature. It floats and is waterproof. This bee alerts with a
green light and the symbol when the water temperature is lower than
30ºC and with a red light and the symbol when the water temperature
is higher than 39ºC (default value, it can be fixed between 37ºC to 40ºC).
Moreover, when you put the bee into the water, a stopwatch starts up,
displaying the time since the thermometer has been put into the water.
Additionally the bee measures and displays the room temperature
(while it is out of water), and also shows the clock time.
To make your batteries last longer, this device is endowed with an
automatic delete function for the temperature measurement function
which is activated around 30 minutes after taking the thermometer out
of the water. To reactivate it, put the bee in the water or press any of the
buttons you’ll find on the back of the thermometer.
A Clock and High temperature
alarm set-up:
When the bee is in clock function, please
press Set button for 3 seconds. Time starts
flashing. To set Hours press + and - buttons.
Press set button again and to set Minutes
press + and - buttons. Then press Set button
again and + and - buttons to set the High
temperature alert, and once selected press
Set button again to complete the process.
NOTE: the low temperature alert
is set by default at 30ºC