miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
40
6
I
NFRARED REMOTE CONTROL
Once configuration is complete, the computer is not required and can be disconnected. An infrared remote can
be used to control volume, mute, preset selection, and input selection. The optional miniDSP remote can be
used with the nanoSHARC:
Source
Cycles through the input sources.
1, 2, 3, 4
Switches to the selected preset.
[Bell]
Has no function with the nanoSHARC.
Vol
Reduce or increase the volume. Each press changes the volume in 0.5 dB.
Holding down a button will accelerate volume change to 3 dB steps.
Mute
Mutes and unmutes audio output.
The nanoSHARC
can also “learn” the control codes of your current remote if it supports one of the following
remote control codes:
•
Apple
•
NEC
•
Sony
•
Philips RC6
To initiate the learning process, drop down the IR Remote menu and
select
IR learning
. Click on the
Learn
button for an operation, and then
press the desired button on the remote control. If the code is accepted,
the status will change to show a tick, as shown at right.
To "unlearn" a command, press the
Learn
button and wait
for the plugi
n to time out. Note that you cannot “learn” the
miniDSP remote
–
it will always work, even if you learn
another remote’s codes.
