miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
16
4
C
ONFIGURING THE NANO
SHARC
The nanoSHARC can be configured with either the
nanoSHARC-2x8-96k
or
2x4 HD1
plugin / user interface
program. This section describes the
nanoSHARC-2x8-96k
plugin. If you intend to use the
2x4 HD1
plugin with
the nanoSHARC board, please refer to the
Once the nanoSHARC is fully configured, the computer is no longer required, as source and preset selection can
be done with a remote control. If desired, however, the plugin can remain connected during use for real-time
(“live”) control of all audio
processing.
This screenshot shows the
nanoSHARC-2x8-96k
plugin with the key areas highlighted:
During
initial
configuration of the processor, it is strongly recommended that any connected
amplification be powered off.
If switching plugins, be sure to use the Refresh DSP Program option from the Restore menu.
