miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
47
8.
Click the Erase-Program-Verify button. The progress bar will update. Do not disconnect the USB cable or
remove power from the processor while this runs! After some time, the status will update to show
successful completion.
9.
Click the Run Application button to reboot the nanoAVR DL.
10.
Click the Disconnect button
11.
Close the PIC32 Bootloader application window.
12.
Return to the nanoAVR DL Utility program. Click on the Connect button, and then on About to verify the
new firmware version:
7.5.2
Mac OS X
1.
Remove power from the nanoAVR DL.
2.
Connect the nanoAVR DL to your computer via USB (if not already connected).
