miniDSP Home Theater Series, User Manual

Page: 40 / 49

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice
40
7 A
DDITIONAL
I
NFORMATION
7.1 T
HE
N
ANO
AVR DL U
TILITY PROGRAM
The NanoAVR DL Utility program is an auxiliary program for configuring certain functions of the nanoAVR DL. It
is not used for measurement or calibration.
Master volume
Displays the current master volume setting.
Mute
Mutes all audio output.
Connect/Connected
Click on the Connect icon to connect to the nanoAVR
DL. To disconnect, quit from the utility program.
Source
Displays the currently selected HDMI input. Click to
show a dropdown menu to select the input.
Channel Mode
Selects the way in which audio channel count is
signaled to the downstream HDMI device. See
Channel Mode .
Refresh DSP Program
Updates the internal DSP program with the version
contained in the utility program. Use this after
downloading a new version of NanoAVR DL Utility.
Restore All to Default
Clears all four loaded filter presets.
About
Provides the current versions of DSP firmware. Please provide this information when submitting
a support ticket at
minidsp.desk.com .
IR Learning
Buttons used to learn infrared remote control codes. See Infrared remote control .
Be sure to quit Dirac Live Calibration Tool before starting the NanoAVR DL Utility program. Running
both programs at the same time may result in communication conflicts and odd behavior.