miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
44
8.12
C
ONFIGURATION PRESETS
The complete set of data that controls the DSP processor is called a
configuration
. This includes input levels,
bass and treble controls, parametric EQ, FIR filtering and the routing matrix. It does
not
include the volume set
by the volume knob.
Four configurations are stored onboard in the HA-DSP as presets
. By default, these are all set to “straight
-
through” processing.
The current preset is indicated in the row near the top of the UI as the darkened one:
When you are in online mode and change any of the processing parameters in the UI, you are changing the
settings of the current preset. To switch to a different preset, just click on the desired button.
8.12.1
Selecting presets from the front panel
1.
Press the control button on the front panel repeatedly until the LED for the desired preset is lit (1 to 4).
2.
Press and hold the button for two seconds.
3.
Release the button.
Note: after preset 4, both LEDs 1 and 4 will turn on. If this special preset is selected, the DSP will be completely
disabled.
8.12.2
Saving and loading presets
To save the current preset to a file, drop down the File menu and select
Save
then “
Save current configuration
.”
Select the location in the file system and enter the desired file name, then click Save.
It is recommended that you save your configurations to files to ensure that you do not lose them if you
inadvertently reset the HA-DSP.
To load a preset from a file, first select the preset that you want to load into. Then drop down the File menu and
select
Load
then
“
Load configuration to current slot.
”
Select the configuration file and click Open.
