miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
19
When making analog audio connections, just push the RCA connectors on and pull them off. Try to avoid
twisting the plugs to get them on and off.
2.5.2
Reconnect to the plugin
With the connected equipment still turned
off
, reconnect the USB cable to the computer. You can optionally
connect an auxiliary power supply at this time
–
see
Supply DC power
. Click on the
Synchronize
button again.
This time, be sure to select the
Synchronize
option from the dialog box:
The miniDSP is now in online mode again.
2.5.3
Initial audio check
Power on your connected equipment: first on the input side (e.g. preamp), then on the output side (e.g. power
amps).
Turn the volume on your source and/or amplification down low, and start playing music or a pink noise test
signal. Gradually increase the volume until your hear audio quietly coming from the speakers. Verify that the
plugin is performing the intended function. For example, if you are implementing a two-way crossover, confirm
that the tweeter is playing high frequencies, and that the woofer is playing low frequencies. (If you have a
measurement microphone and software that allows real time spectrum analysis, then by all means use it.)
