miniDSP C-DSP 6X8, User Manual

Page: 34 / 37

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice
34
5.3 I
NFRARED REMOTE CONTROL
Many standard and programmable remote control units can be used with the C-DSP 6x8. Rather than make you
acquire yet another remote, the C-DSP 6x8 can “learn” the control codes of your current remote if it supports
one of the following remote control codes:

NEC

Sony

Philips RC6
To initiate the learning process, drop down the IR Remote menu and select IR learning . Click on the Learn
button for an operation, and then press the desired button on the remote control. If the code is accepted, the
status will change to show a tick.
This screenshot shows the IR learning screen:
To "unlearn" a command, press the Learn button and wait for the plugin to time out.
The preset cannot be changed with the infrared remote while there is a USB connection to the
computer. To change presets while connected via USB, connect via the plugin and use the Config
selectors.