Mini COOPER ALL4 CLUBMAN, Owner'S Manual

Page: 231 / 268

Press the latches together, arrows 1, and
remove the bulb holder.
4. Remove the bulb holder from the opening.
5. Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
▷ Arrow 1: brake lights/tail lights.
▷ Arrow 2: turn signal.
▷ Arrow 3: reversing light.
6. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Central brake lamp and license plate
lamp
Follow the general instructions on lights and
bulbs, refer to page
225 .
The lights feature LED technology. In the case
of a malfunction, contact a dealer’s service cen‐
ter or another qualified service center or repair
shop.
Side turn signal, bulb replacement
Follow the general instructions on lights and
bulbs, refer to page
225 .
Bulb: WY5W
1. Push the side turn signal forward in the
driving direction, arrow 1, and swing it out‐
ward, arrow 2.
2. ▷ On the left facing the driving direction:
turn the bulb holder clockwise and re‐
move.
▷ On the right facing the driving direc‐
tion: turn the bulb holder counterclock‐
wise and remove.
3. Replace the bulb.
4. Insert the bulb holder.
5. Insert the rear side turn signal, arrow 1, and
swing it forward, arrow 2.
Vehicle battery
Maintenance
The battery is maintenance-free.
The added amount of acid is sufficient for the
service life of the battery.
Seite 231
Replacing components
MOBILITY
231
Online Edition for Part no. 01 40 2 976 603 - X/16