Mini CONVERTIBLE Owner'S Manual Download Page 98

Page: 98 / 324

Locking the seat belt

Pull out the belt strap completely.

Secure the child restraint system with

the seat belt.

Allow the belt strap to be pulled in and

pull it tight against the child restraint

system. The seat belt is disabled.

Unlocking the seat belt

Unbuckle the seat belt buckle.

Remove the child restraint system.

Allow the belt strap to be pulled in com-

pletely.

LATCH child seat mountings

General information

LATCH: Lower Anchors and Tether for Chil-

dren.
Pay attention to the operating and safety in-

formation from the child restraint system

manufacturer when installing and using

LATCH child restraint fixing systems.

Mounts for the lower LATCH

anchors

General information

The lower anchors may be used to attach

the CRS to the vehicle seat up to a com-

bined child and CRS weight of 65

lbs/

kg when the child is restrained by the

internal harnesses.

Safety information

Warning

If the lower mountings of the child re-

straint system are not correctly engaged,

the protective effect of the child restraint

system is limited. There is a risk of injury

or danger to life. Make sure that the lower

mountings are correctly engaged and that

the child restraint system fits securely

against the backrest.

Warning

The mounts for the lower mountings and

attachment points of the child restraint

system are intended for attaching child re-

straint systems only. If other objects are

attached, the mounts or attachment points

can be damaged. There is a risk of injury

or risk of damage to property. Attach child

restraint systems only at the correspond-

ing mounts for the lower mountings or at-

tachment points.

Position

Icon

Meaning

The corresponding icon

shows the mounts for the

lower LATCH anchors.
Seats equipped with lower

mountings are marked with

a pair, (2), of LATCH sym-

bols.

Before installing LATCH child

restraint systems

Pull the seat belt away from the area of the

child seat mountings.

Seite 98

CONTROLS

Transporting children safely

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands