Mini CONVERTIBLE Owner'S Manual Download Page 290

Page: 290 / 324

Overview

SOS button at the interior mirror

Functional requirements

–

The ignition is switched on.

–

The Assist system is functional.

–

If the vehicle is equipped with intelli-

gent emergency call: the integrated SIM

card in the vehicle has been activated.

Automatic triggering

Under certain conditions, for

instance if

the airbags deploy, an emergency call is au-

tomatically initiated immediately after an

accident of corresponding severity. Auto-

matic Collision Notification is not affected

by pressing the SOS button.

Manual triggering

Press the cover flap briefly to open it.

Press the SOS button until the LED at

the button lights up green.

–

The LED is illuminated green when an

emergency call has been initiated.
If the situation allows, wait in your vehi-

cle until the voice connection has been

established.

–

The LED flashes green when a connec-

tion to the MINI Response Center has

been established.

The MINI Response Center then makes

contact with you and takes further steps

to help you.
Even if you are unable to respond, the

MINI Response Center can take further

steps to help you under certain circum-

stances.
For this purpose, data that serves to de-

termine the necessary rescue measures,

for instance the current position of the

vehicle when it can be determined, is

transmitted to the MINI Response Cen-

ter.
If you can no longer hear the MINI Re-

sponse Center through the loudspeakers,

the hands-free system, for instance, may

be broken. However, the MINI Response

Center may still be able to hear you.

The MINI Response Center ends the emer-

gency call.

Jump-starting

General information

If the battery is discharged, the engine can

be started using the battery of another vehi-

cle and two jumper cables. Only use jumper

cables with fully insulated clamp handles.

Safety information

DANGER

Contact with live components can lead to

an electric shock. There is a risk of injury

or danger to life. Do not touch any compo-

nents that are under voltage.

Seite 290

MOBILITY

Breakdown Assistance

290

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands